Philips DVDR890 - Of Abbreviations

Circuit-, IC Descriptions and List of Abbreviations
EN 197DVDR880-890 /0X1 9.
2001 Aug 01 12
MPEG-2 video and MPEG-audio/AC-3 audio
encoder with multiplexer
SAA6752HS
SM_D4 180 input/output 4 reserved (do not connect), static memory data input/output
bit 4 with internal pull-down resistor
V
SSCO
181 ground − internal pre-driver and substrate ground
V
SSCO
182 ground − core ground
V
DDCO
183 supply − core supply voltage (2.5 V)
V
DDCO
184 supply − internal pre-driver supply voltage (2.5 V)
V
DDP
185 supply − pad ring supply voltage (3.3 V)
SM_D11 186 input/output 4 reserved (do not connect), static memory data input/output
bit 11 with internal pull-down resistor
SM_D3 187 input/output 4 reserved (do not connect), static memory data input/output
bit 3 with internal pull-down resistor
SM_D12 188 input/output 4 reserved (do not connect), static memory data input/output
bit 12 with internal pull-down resistor
SM_D2 189 input/output 4 reserved (do not connect), static memory data input/output
bit 2 with internal pull-down resistor
V
SSP
190 ground − pad ground
SM_D13 191 input/output 4 reserved (do not connect), static memory data input/output
bit 13 with internal pull-down resistor
SM_D1 192 input/output 4 reserved (do not connect), static memory data input/output
bit 1 with internal pull-down resistor
SM_D14 193 input/output 4 reserved (do not connect), static memory data input/output
bit 14 with internal pull-down resistor
SM_D0 194 input/output 4 reserved (do not connect), static memory data input/output
bit 0 (LSB) with internal pull-down resistor
V
DDP
195 supply − pad ring supply voltage (3.3 V)
SM_D15 196 input/output 4 reserved (do not connect), static memory data input/output
bit 15 (MSB) with internal pull-down resistor
SM_CS3 197 output 4 reserved (do not connect), static memory chip select output for
external ROM or RAM (active LOW)
SM_A4 198 output 4 reserved (do not connect), static memory address output bit 4
SM_A3 199 output 4 reserved (do not connect), static memory address output bit 3
V
SSP
200 ground − pad ground
SM_A2 201 output 4 reserved (do not connect), static memory address output bit 2
SM_A15 202 output 4 reserved (do not connect), static memory address output bit 15
SM_A1 203 output 4 reserved (do not connect), static memory address output bit 1
SM_A16 204 output 4 reserved (do not connect), static memory address output bit 16
V
DDP
205 supply − pad ring supply voltage (3.3 V)
SM_A0 206 output 4 reserved (do not connect), static memory address output bit 0
(LSB)
SM_A17 207 output 4 reserved (do not connect), static memory address output bit 17
(MSB)
SM_CS0 208 output 4 reserved (do not connect)
SYMBOL PIN INPUT/OUTPUT
(1)
I
max
(mA)
DESCRIPTION