Mechanical and Dismantling Instructions
Dismantling Instruction
Step3: If the tray can’t open in normal way, you can make it through the instruction as below (Figure 3).
Note: Make sure to operate gently otherwise the guider would be damaged.
Step4: Dismantling Loader, disconnect the 3 connectors aiming in the below figure, and remove 1 screw around the
Loader. (Figure 4)
Push the guider until the tray out.
Make sure to operate gently to
avoid damage happening.
Figure 3
2-2
Figure 4
CON 3
CON 1
CON 2
To Next Page
Loading...
