Mechanical and Dismantling Instructions
Step3
: Dismantling Loader, First, disconnect the 3 connectors
aiming in the figure, and then remove the 4 screws at both
sides of the loader,(Figure 4)
Step4
: Dismantling Front Panel: disconnect the 2 connectors
aiming in the figure then Release the snaps on the both sides
of Front Panel and gently pull the Panel out from the set.
Figure4
Figure 5
Figure 6
Snap1
Snap2
CON 1
CON 2
CON 3
CON 4
CON 5
2-2
(Figure5& 6)
To Next Page
Loading...
