Note: Some particles may come out of the soleplate when you use the iron for
Note: When you switch on the appliance, the steam generator may produce a
1 Remove any sticker or protective foil from the soleplate and clean
the soleplate with a soft cloth.
Preparing for use
1
Place the steam generator on a stable and level surface, e.g. on the
hard part of the ironing board or on a table.
Filling the detachable water tank
Do not put hot water, perfume, vinegar, starch, descaling agents, ironing
aids or other chemicals in the water tank.
1 Remove the detachable water tank from the steam generator.
2 Fill the water tank with tap water up to the MAX indication.
Note: If the tap water in your area is very hard, we advise you to mix it with an
3
Note: If the water tank is not properly placed, the iron does not produce any
steam ironing is no longer possible.
1
2 Put the water tank back into the steam generator.
, The iron is ready for steam ironing again.
Setting the temperature
1 Check the laundry care label of the article to be ironed to determine
the required ironing temperature.
- 1 for synthetic fabrics ( e.g. acrylic, viscose, polyamide) and silk
- 2 for wool
ENGLISH8
To Next Page
Loading...
