Philips Efficia DFM100 - Changing the EtCO2 Alarm Limits; Enabling;Disabling the EtCO2 Alarms; Changing the AwRR Alarm Limits

EtCO
2
and AwRR Alarms 9: Monitoring CO
2
105
Changing the EtCO
2
Alarm Limits
 To c h a n ge t h e E t C O
2
alarm limits:
1 Press the Smart Select knob.
2 Turn the Smart Select knob to highlight the  menu and press the Smart
Select knob.
3 Select  and press the Smart Select knob.
4 Select  and press the Smart Select knob.
5 Turn the Smart Select knob to select the new high limit value then press the Smart Select knob.
6 Set the new low limit value and press the Smart Select knob.
Enabling/Disabling the EtCO
2
Alarms
 To enable or disable the EtCO
2
alarms:
1 Press the Smart Select knob.
2 Turn the Smart Select knob to highlight the  menu and press the Smart
Select knob.
3 Select  and press the Smart Select knob.
4 Select  () and press the Smart Select knob.
Changing the AwRR Alarm Limits
 To change the AwRR alarm limits:
1 Press the Smart Select knob.
2 Turn the Smart Select knob to highlight the  menu and press the Smart
Select knob.
3 Select  and press the Smart Select knob.
4 Select  and press the Smart Select knob.
5 Turn the Smart Select knob to select the new high limit value then press the Smart Select knob.
6 Set the new low limit value and press the Smart Select knob.