Philips Efficia DFM100 - Printing Data; Printing During a Patient Event

Printing Data 13: Data Management
143
Printing Data
The Efficia DFM100 can print multiple pieces of information in both clinical and non-clinical
modes. The device can be configured to print automatically when certain events occur or you can
initiate a print request at any time during an event.
Printing During a Patient Event
The Efficia DFM100 allows you to print various data reports in a clinical mode during a patient
event.
 To print a strip during an event:
1 Press the Print button .
The printed strip (see Figure 70) contains the header information, configured waveforms, wave
markings (R-Wave Arrows, Pacing Markers) and events, including event markers. See Tab le 3 0.
The Efficia DFM100 can also be configured to print a strip when an alarm, charge, shock or mark
event occurs. See Table 43 “Printing Settings” on page 156.
 To print an Event Summary for the current event:
1 Press the Report button .
2 Turn the Smart Select knob to highlight
 and press the Smart Select knob.
Figure 70 Sample Printed Strip
Table 30 Event Markers
Event Symbol
Mark Event
Physiological Alarm
Shock Delivered




