13: Data Management Printing Data
144
Printing While in Data Management Mode
To print a Event Summary contained in Internal Memory:
1 Use the Smart Select knob to select the Event Summary you wish to print.
2 Press the Smart Select knob and select
.
OR
Press the Report button , select
from the listing and press the Smart
Select knob to print.
To print a Trends Report related to an Event Summary contained in Internal Memory:
1 Select the Event Summary that contains the Trends Report you wish to print.
2 Press the Report button , select
from the listing and press the Smart Select knob.
3 Use the Smart Select knob to select the Trend Interval you want. Press the Smart Select knob to
begin printing.
NOTES: To see how to install printer paper rolls, see “Installing Printer Paper” on page 17.
If you change from a clinical to non-clinical mode during printing, the Efficia DFM100 ask if you
want to stop printing. Select
to stop printing and to continue printing.
If you have manually started printing a strip and the Efficia DFM100 tries to automatically initiate a
strip, the automated print strip is ignored.
If the Efficia DFM100 automatically initiates a print strip and then automatically initiates another
print strip, the first strip is extended to include data through the end time of the second strip.
If a request to print a data report is made while the printer is currently printing another report, the
Efficia DFM100 prompts you with questions. Your answers determine which report takes
precedence for printing.
To Next Page
Loading...