Philips Efficia DFM100 - Page 167

Overview 14: Configuration
155
 Defines whether SpO
2
monitoring is available in
AED Mode.
, 


Defines whether EtCO
2
monitoring is available
in AED Mode.
, 


Defines the energy dose for the first shock in a
series in AED Mode.
All energy settings ≥ 150J up to
200J, 150


Defines the energy dose for the second shock in a
series in AED Mode.
All energy settings ≥ the first
configured shock in the series
up to 200J, 150


Defines the energy dose for the third and
subsequent shocks in a series in AED Mode.
All energy settings ≥ the second
configured shock in the series
up to 200J, 150
Table 39 AED Settings (Continued)
Parameter Description Setting Choices User Setting
Table 40 CPR Settings
Parameter Description Setting Choices User Setting
 Defines the length of the CPR administration
interval.
1, 1.5, 2, 2.5, 3 min
Table 41 Pacer Settings
Parameter Description Setting Choices User Setting


Defines the delivery rate of paced pulses. 30-180, 70 pulses per minute
Adjusted in increments of 10


Defines the paced pulse duration. 20, 40 msec


Defines the pacer output default setting at which
paced pulses are delivered.
If Paced Pulse duration is 20
msec: 10-200, 30 mA
If Paced Pulse duration is 40
msec: 10-140, 30 mA
Table 42 Mark Events Settings
Parameter Description Setting Choices User Setting
 Defines the first mark event menu choice. 

Defines the second mark event menu choice. 

Defines the third mark event menu choice. 

Defines the fourth mark event menu choice. 

Defines the fifth mark event menu choice. 

Defines the sixth mark event menu choice. 