17: Troubleshooting Resolving Issues
180
Device Info Report
While troubleshooting, it is often beneficial to know what versions of software and hardware your
Efficia DFM100 contains. The Device Info Report provides that information.
To print a Device Info Report:
1 Press the Smart Select knob.
2 Turn the Smart Select knob to highlight
and press the Smart Select knob.
3 Select
and press the Smart Select knob to print the report.
The Device Info Report contains information on:
If there is a device failure and the Efficia DFM100 cannot determine a version number, a
is
displayed in its place.
If your Efficia DFM100 does not have an option installed or, in the case of the CO
2
sensor, the
module is not connected to the device, no information is printed.
NOTE: When first turning the Efficia DFM100 on or plugging the CO
2
sensor in, it needs to warm up for
10 seconds before information is ready for the Device Info Report.
• Serial Number • Installed Options
• Software Revision • External Modules
• Main Processor PCA • Therapy Board
•Processor Module •Printer
To Next Page
Loading...