EasyManua.ls Logo

Philips Elance - Auto-shut-off; Auto-shut-off Safety Feature

Philips Elance
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Drip Stop (types GC3135, GC3130, GC3128, GC3126,
GC3125, GC3120, GC3115 only)
This iron features a "Drip Stop" steam shut-off facility: the iron
automatically stops steaming at too low temperatures to prevent water
from dripping out of the soleplate.When this happens you may hear a
sound.
Vertical Shot of Steam (types GC3135, GC3130, GC3128,
GC3126, GC3125, GC3120, GC3117, GC3116, GC3115,
GC3114, GC3113, GC3112, GC3111, GC3110 only).
C
1 The Shot of Steam function can also be used when you hold
the iron in vertical position.
Never direct the steam towards people.
Automatic Anti-Calc (types GC3135, GC3130, GC3128,
GC3126, GC3125, GC3120, GC3117, GC3116, only).
C
1 The built-in Automatic Anti-Calc system reduces deposit of
scale and ensures a longer life of the iron.
Auto-shut-off (type GC3135, only)
C
1 An electronic safety device will automatically switch off the
iron if it has not been moved for a while.
To indicate that the iron has been switched off, the red auto-off
pilot light will start blinking.
To heat up the iron again:
- Pick up the iron or move it slightly.
- The red auto-off pilot light will go out.The amber temperature pilot
lightmay come on, depending on the soleplate temperature.
- If the amber pilot light comes on after the iron is moved, wait for it to
go out before start ironing.
- If the amber pilot light does not come on after the irom is moved, the
iron is ready for use.
ENGLISH 7

Related product manuals