5
2. Setting up the
monitor
2�1 Installation
1
Package contents
*Earphone-Hang
*DP
*HDMI Power
* USB A-B
27M1N3500LS
Quick start
Register your product and get support at www.philips.com/welcome
*Dierent according to region
2
Install the base
1. Place the monitor face down on soft
and smooth surface taking care to
avoid scratching or damaging the
screen�
2� Hold the stand with both hands�
(1) Gently attach the base to the
stand�
(2) Use your ngers to tighten the
screw located at the bottom of
the base�
(3) Gently attach the stand to the
VESA mount area until the latch
locks the stand�
1
3
2
Caution
Place the monitor face down on a
smooth surface� Pay attention not to
scratch or damage the screen�
To Next Page
Loading...
