Solutions
Charge the appliance.When
charging for the first time,
leave the appliance to charge
continuously for 16 hours.
Always put the appliance back
onto the charging unit after
every use to recharge.
Make sure that the appliance
is placed properly on the
charging unit.The charging
light will go on to indicate that
the appliance is charging.
Push the on/off slide backward
to put it in the 'off' position.
Make sure the slide is in the
'off' position during charging.
Wipe the dirt off the contact
strips with a dry cloth.
Insert the adapter into the
wall socket (properly).
Causes
The appliance has not been
charged.
The appliance has not been
placed properly on the
charging unit.
The contact strips on the
appliance and on the charging
unit are dirty.
The adapter has not been
inserted (properly) into the
wall socket.
Problem
The appliance
does not
work.
Troubleshooting
If the appliance does not work or does not work properly, first check
the list below. If the problem is not mentioned in this list, the appliance
probably has a defect. In that case we advise you to take the appliance
to your dealer or to an authorised Philips service centre.
ENGLISH 11
To Next Page
Loading...
