Note: If necessary , you can clean the inner lter and the outer lter in cold
or lukewarm water. Dry the inner and outer lter thoroughly before you use
the lter unit again.
3 Placetheouterlterbackontothelterholder(1)andturnit
clockwise to attach it (2). (Fig. 12)
4 Putthelterunitbackintothedustcompartment(Fig.13).
Note: Make sure you insert the lter unit in the correct way.
Storage
1
You can store the vacuum cleaner, car cord and the accessories in
the storage bag.
Replacement
We advise you to replace the inner lter after a prolonged period of use
or if you can no longer clean it properly.
1 Removethelterunitfromthedustcompartment(Fig.8).
2 Turntheouterlteranticlockwise(1)andremoveitfromthelter
holder (2) (Fig. 11).
3 Gentlyturntheinnerlteranticlockwise(1)andremoveitfrom
thelterholder(2)(Fig.14).
4 Placeanewinnerlteronthelterholder(1)andturnit
clockwise to attach it (2) (Fig. 15).
5 Pushthetipoftheinnerlterinwards(Fig.16).
6 Placetheouterlteronthelterholder(1)andturnitclockwise
to attach it (2). (Fig. 12)
7 Putthelterunitbackintothedustcompartment(Fig.13).
Note: Make sure you insert the lter unit in the correct way.
ENGLISH 9