Use this simple and quick way to watch
your favourite DVD movie and enjoy
your Home Cinema experience!
Helpful Hints
You only need to make one video connection to your TV in
order to view the DVD playback.
If your TV has S-Video or Component (PR
PB Y) video jacks, use one of these video
connections instead for higher picture quality.
If your TV has only a single Antenna In jack,
you will need an accessory RF modulator. The RF
modulator converts the video from the DVD system
so it can play through the TV’s Antenna connector.
Refer to your owner’s manual for proper connection.
When listening to TV programs, press TAPE/AUX
button on the remote control to set the DVD system to AUX
mode in order for the sound to be heard.
Please refer to Owner’s Manual for more TV connection options.
FWD876/98
To Next Page
Need help?
General
