Philips GC2560 - Water Drips After Cooling

Problem Cause Solution
Therearewater
dropletsonthe
fabric.
(GC2640/GC2620/GC2530/
GC2528/GC2520/GC2510
only).Thesettemperatureis
toolowforsteamironing.
Setthetemperaturedialtoapositionin
thesteamarea(
2toMAX).Puttheiron
onitsheelandwaituntilthetemperature
lighthasgoneoutbeforeyoustartironing.
Waterdripsoutof
the soleplate after
theironhascooled
downorhasbeen
stored.
Theironhasbeenputin
horizontalpositionwhile
therewasstillwaterinthe
watertank.
Emptythewatertankandsetthesteam
controltoposition
Oafteruse.Storethe
irononitsheel.
ENGLISH 11