Need help?Do you have a question about the Philips GC360 and is the answer not in the manual?
General| Brand | Philips |
|---|---|
| Model | GC360 |
| Category | Steam Cleaner |
| Language | English |
The main part of the appliance used for steaming fabric.
Indicator light showing when the steamer is ready for use.
Reservoir for water needed to generate steam.
Button to turn the appliance on and off.
Cord connecting the appliance to the power source.
Accessory for improving steam penetration on thicker fabrics.
Bag for storing the hot steamer or protecting surfaces.
Protective glove to shield hand from steam.
Button to activate steam release.
Avoid using your bare hand as a support when steaming garments.
Gently pull garment sides to stretch fabric while steaming.
Do not place the steamer head on the power cord after use.
Press steamer head against garment and pull sides to stretch.
Button up shirts; move steamer upwards on pockets.
Steam sleeves from shoulder down, pulling diagonally.
Move steamer horizontally along garment collars.
Use for natural look; iron recommended for tough wrinkles/formal look.
Visit www.philips.com/garmentsteamers for more garment steaming tips.
Do not add perfume, vinegar, or other chemicals to the water tank.
Light indicates when the steamer is heating up and ready.
Keep the steam trigger pressed for continuous steam output.
Allow garments to dry before storing or wearing after steaming.
Unplug the steamer before attaching or detaching the brush.
Empty and rinse the water tank after each use to prevent scale.
Avoid abrasive cleaners or aggressive liquids for cleaning.
Check power connection and ensure device is switched on.
Verify power, heating, and steam trigger activation.
Ensure steamer is heated adequately and water tank is properly filled.
Normal operation as water is converted to steam.
Ensure water tank is full and filling door is properly closed.
Use only recommended water types; avoid additives.
Check power connection and ensure device is switched on.
Verify power, heating, and steam trigger activation.
Ensure steamer is heated adequately and water tank is properly filled.
Ensure water tank is full and filling door is properly closed.
To Next Page