Philips GC920 - Page 22

22
1
2
EN Align the pins of the new bulb with the
openings of the bulb holder and push
the bulb in. Rotate the bulb upwards to
tighten it.
ZH-S
将新灯管的插芯与灯座的开口对
齐，然后推入灯管。向上旋转灯管
将其拧紧。
EN Put back the metal cover. Insert the
rings onto the screws. Tighten the
screws on the metal cover.
ZH-S
放回金属盖板。将垫圈插入螺丝。
拧紧金属盖板上的螺丝。
5
EN Rotate the bulb until the pins on both
sides align with the openings of the
bulb holder. Pull out the bulb.
ZH-S
旋转灯管，直至两端的插芯与灯座
的开口对齐。拿出灯管。
3 4