7
5 Replacement of lter and HESAMax cartridge
This product has 2 air ltration features require replacement: a high-eciency particle
lter and a HESAMax cartridge.
5.1.1 Filter replacement reminder
5.2 How to replace HESAMax cartridge
5.1.2 How to replace the lter
5.1.3 How to reset the air sanitizer
The air sanitizer will
automatically remind you
to replace the lter.
HESAMax cartridge works 24/7, the replacement cycle depends on the in-car gas/odor level.
The recommended replacement period is 12 months.
Remove the HESAMax cartridge from the base and replace with a new one. Then, x the base back in place
.
1. After removing the base,
open the lter cover and
remove the lter.
When the lter needs to
be replaced, the blue light
ring on the top of
the air sanitizer will blink
every time it’s turned on.
1.
With the lter cover is
open, power on the air
sanitizer. Press and hold the
ON/ OFF button for more
than 5 seconds until you
hear “ding ding” and release
the button to reset the lter.
2. Close the lter cover
and install the base.
3. If the reset failed, please
repeat the above steps.
m Precautions
For the sake of safety, when the lter cover is open, the fan inside the air sanitizer and the UVC
lamp will stop working.
Please be sure to use genuine Philips SaniFilter Plus and HESAMax cartridge, and replace
them in a timely manner. This will maintain the best performance of Philips car air sanitizers
and make sure the purest air in the car.
To Next Page
Loading...
