until the motor almost stops operating during
a session. Then recharge the battery. Follow this
procedure at least twice a year.
Using the appliance
The hair length settings are indicated in millimeters.
The settings correspond to the remaining hair length
after trimming.
Be careful when you trim for the rst time. Do
not move the trimmer too fast. Make smooth and
gentle movements.
Tip: Start trimming at a high length setting and reduce
the length setting gradually until you have reached the
desired hair length.
Trimming with comb
There are 3 different combs:
- 1-7mm
- 7-24mm
- 24-42mm
1 Attach one of the combs to the appliance.
2 Press up button or down button to select the
desired length setting.
Note: When you trim for the rst time, start at the
highest length setting to familiarise yourself with the
appliance.
3 Switch on the appliance.
ENGLISH
24
HC7462-15_EN_A6_CS6.indd 24 16/10/25 17:17
To Next Page
Loading...
