Philips HC7650 - Support and Disposal; Storage and Replacement

aggressive liquids such as petrol or acetone
to clean the appliance.
1 Make sure that the appliance is switched off
and disconnected from the wall socket.
2 Wipe the housing of the appliance with a dry
cloth.
3 Remove the comb and clean it with the
cleaning brush and/or rinse it under the tap.
4 Press the release button. The cutting unit
comes off the appliance.
5 Clean the cutting unit with the cleaning brush
and/or rinse it under the tap.
6 Clean the inside of the appliance with the brush
and/or rinse it under the tap.
7 Carefully shake off excess water and let all parts
air dry completely.
8 Insert the lug of the cutting unit into the guiding
slot and push the cutting unit back onto the
appliance.
Storage
Store the appliance in the pouch supplied.
Note: Make sure the appliance is dry before you
store it in the pouch.
Replacement
Only replace a worn or damaged cutting unit with
an original Philips cutting unit, available from an
authorized Philips service center.
1 Press the release button. The cutting unit
comes off the appliance.
2 Dispose of the old cutting unit in accordance
with local waste regulations.
11
English