*
Fault Reason Solution
1. Rice Cooker
doesn’t work
1.No power supply is outputted from the
socket
Check the power supply of the socket by having
another appliance connected
2.Power cord being open circuit Check the power cord by replacing it with the a
same one
3.The plug isn’t fully connected Insert the plug completely to ensure a fully
connecting
4.The corresponding function button is not
pressed
Choose the function ,then press start button
-Temperature Limiter assembly fuses
Replace the Temperature Limiter assembly
6.Heating element damages Replace heating element and related assembly
7.Bottom sensor being open circuit
Replace bottom sensor
8.Bottom sensor being short circuit
Replace bottom sensor
9.High temperature of bottom sensor
It is suggested to replace the PCB board if it is
stilled shown over temp. even the inner pot is
closely contacted with the heating element
10.Top sensor being open circuit Replace top sensor
11.Top sensor being short circuit
Replace top sensor
2. Undercooked
1.Rice and water in wrong proportion
Make right rice-water proportion under manual
instruction
2.Constant lid-opening while simmering In no rush of opening lid while simmering rice
、 Inner pot inappropriately placed
Move the inner pot around to ensure a well
contact between inner pot and heating element
- Raffles between heating element and inner
pot
Remove raffles between heating element and
inner pot( with sandpaper or alcohol )
5. Cook rice with fat Clean out the fat
6.Heating element deformed or unevenly
heating
Repalce the heaing element
7.Bottom of inner pot is deformed or not fully
contacted with the heating element
Repair or replace the inner pot
8.Top heating element malfunctions Repalce top heating element
9.Main thermostat malfunctions Replace main thermostat
、 B%'.0
=*'
1.PCB board malfunctions Replace PCB board
2.Difference in rice quality
Define that whether the burning is caused by a
change in rice quality
3.Mian hermostat malfunctions Replace main thermostat
To Next Page
Loading...
