Philips HearLink 9030 MNR T R - Page 29

29
Replace ProWax miniFit lter
2. Remove 3. Insert
Remove the tool
from the shell. The
tool has two pins,
one empty for re-
moval and one with
the new wax lter.
Insert the empty pin
into the wax lter in
the speaker and pull
it out.
Insert the new wax
lter using the other
pin, remove the tool,
and throw it out.
1. Tool
New
lter
New
lter
Empty
pin
Old
lter
Final
Note
If you use a mold or LiteTip, your hearing care professional must replace the wax lter in the speaker.