61
Important notice
When the DAI is connected to an audio
source plugged into a wall outlet, the audio
source must comply with IEC-60065,
IEC-60950 or equivalent safety standards.
systems and other devices) may occur. If this
occurs, increase the distance between the
hearing aid and the interfering device.
Use on aircraft
· Your hearing aid contains Bluetooth
®
.
On board an aircraft, ight mode must be
activated, unless Bluetooth
®
is permitted by
the ight personnel.
Connection to external equipment
· The safety of the hearing aid when
connected to external equipment with
an auxiliary input cable and/or directly, is
determined by the external signal source.
When connected to external equipment
plugged into a wall outlet, this equipment
must comply with IEC-62368 (or IEC-60065,
IEC-60950 until June 20, 2019) or equivalent
safety standards.
To Next Page
Loading...
