Philips HeartStart MRx Installation Guide

DU-PH-0050-03 Rev D 3/27/12 GCX Corp. Page 1 of 3
Installation Guide
Philips Heartstart MRx and Heartstart XL+ Defibrillator – Flush Wall Mount Kit
The purpose of this guide is to:
1. Describe installation of the Mounting Assembly (page 2).
2. Describe mounting of defibrillator on the Mounting Assembly (page 2).
Parts Reference
The following parts and hardware are included with this installation kit (see photo for part; hardware not shown):
Tools Required
• 1/8'' hex wrench (provided)
Item #
Description
Qty
1
Wall Mount
1
2
Channel Cover (includes instructions)
1
3
1/8'' Hex Wrench
1
1

Philips HeartStart MRx Specifications

General

Category	Racks & Stands
Manufacturer	Philips
Compatibility	Philips HeartStart MRx
Mounting	Roll Stand
Type	Roll Stand
Power Source	N/A (Stand only)
Battery Life	N/A (Stand only)
Display	N/A (Stand only)
Certifications	N/A (Medical grade materials)