PHILIPS MEDICAL SYSTEMS
H-1
H
H ADDITIONAL TECHNICAL INFORMATION
REQUIRED FOR EUROPEAN CONFORMITY
ELECTROMAGNETIC CONFORMITY
Guidance and manufacturer’s declaration: The HeartStart OnSite Defibrillator is
intended for use in the electromagnetic environment specified in the tables
below. The customer or user of the OnSite should assure that it is used in such
an environment.
ELECTROMAGNETIC EMISSIONS
emissions test compliance electromagnetic environment – guidance
RF
CISPR 11
Group 1
Class B
The OnSite uses RF energy only for its internal function.
Therefore, its RF emissions are very low and are not likely
to cause any interference in nearby electronic equipment.
The OnSite is suitable for use in all establishments,
including industrial establishments, domestic
establishments, and those directly connected to the public
low-voltage power supply network that supplies buildings
used for domestic purposes.
To Next Page
Loading...