16
Manual Channel Scan: This feature can be used for direct broadcast entry.
Search Type: Type of the channel to install
Digital Cable, Digital Aerial or Analog
Channel: The preset frequency
Frequency: Input for the frequency
Network scan: Enable or disable the network
scan
Signal quality & Signal Level
These two options will show the quality and
level of signal received on the frequency
defined above.
Network Channel Scan: Searches for the linked channels in the broadcast
system.
Analogue Fine Tune: You can use this setting for fine tuning analogue
channels. This feature is not available if no analogue channels are stored.
To Next Page
Loading...
