9
Cleaning
• For a good and smooth result in epilating, it is essential
that the epilating head is cleaned after each use.
• Never immerse the appliance in water.
• Do not use strong cleaners or scouring agents, petrol,
acetone, etc., to clean the plastic housing of your
Satinelle.
• Never try to remove the epilating discs from the
appliance.
- Switch the Satinelle off (0) (fig. 8) and remove the mains
plug from the wall socket (fig. 14)
- For type HP 6404 only: Remove the precision cap
(fig. 15).
- Press the ribbed section and pull the epilating head from
the appliance (fig. 16).
- Clean the epilating discs and the parts that have become
accessible with the brush (fig. 17).
- Put the epilating head back on the appliance. Press the
non-marked area besides the ribbed section to make the
epilating head snap back to its correct position (“Click!”)
(fig. 18). Please note: The epilating head can only be
mounted in one direction!
To Next Page