, When you start charging the empty shaver, the
charging light goes on.
, When the battery is fully charged, the charging
light starts to ash.
When you unplug the shaver, the charging light goes
out.
After charging, the shaver has a cordless shaving time
of up to 35 minutes.
Charge the appliance when the motor stops or
starts running slower.
1 Put the appliance plug in the shaver.
2 Put the powerplug in the wall socket.
3 Remove the powerplug from the wall socket
and pull the appliance plug out of the shaver
when the battery has been fully charged.
1 Press the on/off button once to switch on the
shaver.
The power-on lights go on to indicate that the
motor is running.
6
To Next Page
Loading...
Need help?
General
