5.5
Switch Off Timer
If the TV receives a TV signal but you don't press a
key on the remote control during a 4 hour period, the
TV switches off automatically to save energy. Also, if
the TV does not receive a TV signal nor a remote
control command for 10 minutes, the TV switches off
automatically.
If you use the TV as a monitor or use a digital receiver
to watch TV (a Set-Top Box - STB) and you do not
use the remote control of the TV, you should
deactivate this automatic switch off.
To deactivate the Switch Off Timer …
1 - Press
, select All Settings and press OK.
2 - Select Eco Settings and press
(right) to enter
the menu.
3 - Select Switch Off Timer and press OK.
4 - Press the arrows
(up) or
(down) to adjust
the value. The value 0 deactivates the automatic
switch off.
5 - Press
(left) repeatedly if necessary, to close
the menu.
For more information on environmentally friendly TV
settings, in Help, press the colour
key
Keywords and look up Eco Settings.
26
To Next Page
Loading...
Need help?
General
