Philips HQ7780 - Trimmer Removal and Travel Lock; Removing the Trimmer; Activating the Travel Lock

C
3 Tilt the trimmer slightly backwards.
C
4 Fit the trimmer onto the shaver (you will
hear a click).The trimmer is now ready for
use.
5 Activate the trimmer by pressing the
on/off button once.
Removing the trimmer
1 Switch the shaver off.
2 Remove the trimmer by pressing the
release button again and pulling the
trimmer off the shaver.
3 Put the shaving unit back onto the shaver.
Travel lock
If you are going to store the shaver for a longer
period or if you are going to travel, it is possible
to lock the shaver.The travel lock prevents the
shaver from being switched on by accident.
Activating the travel lock
1 Press the on/off button for 3 seconds.The
motor is switched off.
ENGLISH 15