◗ Put the retaining frame back into the shaving
unit.
B
Cause 3:the shaving heads are damaged or worn.
◗ Remove the retaining frame.
◗ Remove the old shaving heads from the
shaving unit and replace them with new ones.
Damaged or worn shaving heads (cutters and
guards) may only be replaced with original HQ8
Philishave Sensotec shaving heads.
◗ Put the retaining frame back into the shaving
unit.
2 The shaver does not work when the on/off
button is pressed
B
Cause:the batteries are empty.
◗ Recharge the batteries.
ENGLISH14
To Next Page
Loading...
