Philips HR1949 - Page 10

12
ENGLISH
Problem Solution
The juicing unit cannot
be placed onto the
motor unit.
Check if the spout is properly attached to the juicing
unit. Make sure that the projections on the juicing unit
are aligned with the recesses in the motor unit (see
g. 9).
The juicing unit is
blocked.
Press the pre-clean button for a few seconds. If the
juicing unit is still blocked, then switch o the appliance,
remove the juicing unit and disassemble all parts.
Remove the fruit that is blocking the juicing unit. Then
process a smaller quantity.
The power-on light
ashes. (HR1942,
HR1943, HR1944,
HR1946, HR1947,
HR1949 only)
The juicing unit is blocked. Press the pre-clean button
for a few seconds. If the juicing unit is still blocked, then
switch o the appliance, remove the juicing unit and
disassemble all parts. Remove the fruit that is blocking
the juicing unit. Then process a smaller quantity.