- Never use the mill to grind very hard ingredients such as nutmeg, Chinese rock sugar and ice
cubes.
- Do not touch the cutting edges of the mill blade unit when you clean it. They are very sharp and
you could easily cut your ngers on them.
- Never use the mill for more than 30 seconds without interruption. Let the mill cool down to
room temperature between processing cycles.
- Never forget to place the sealing ring in the blade unit before you assemble the mill jar,
otherwise leakage occurs.
- Always process cloves, star anise and aniseed together with other ingredients. If processed
separately, these ingredients may attack the plastic materials of the appliance.
- The mill beaker may become discoloured when you use the mill to process ingredients such as
cloves, anise and cinnamon.
- The mill is not suitable for chopping raw meat. Use the blender instead.
- Do not use the mill to process liquids such as fruit juice.
- Never use the lter to process ingredients hotter than 80°C.
- Never overload the lter. Do not put more than 70g dried soy beans or 150g fruit in the lter
at the same time.
- Always make sure the lid is assembled properly and the measuring cup is inserted properly in
the lid before you switch on the appliance.
- Cut fruit into smaller pieces before you put it in the lter.
- Soak dried ingredients, such as soy beans, before you put them in the lter.
This Philips appliance complies with all standards regarding electromagnetic elds (EMF). If handled
properly and according to the instructions in this user manual, the appliance is safe to use based on
scientic evidence available today.
This feature ensures that you can only switch on the appliance if you have properly assembled the
blender jar or mill beaker on the motor unit. If the blender jar or mill beaker is correctly assembled,
the built-in safety lock will be unlocked.
A Measuring cup
B Lid of blender jar
C Blender jar
D Level indication
E Sealing ring
F Blade unit
G Motor unit
H Control panel
- Speed buttons (1 and 2)
- Pulse/off button
I Filter (HR2027/HR2024 only)
J Mill beaker (HR2027/HR2021 only)
7
To Next Page
