Preparing the blender for use
C
1 Place the sealing ring on the blade unit.
C
2 Assemble the blade unit onto the blade unit interface.
C
3 Screw the blade unit interface onto the bottom of the blender
jar until it is fixed properly.
C
4 Place the blender jar with the blade unit interface attached on
the motor unit.
You can place the blender jar on the motor unit in two positions: with
the handle pointing to the right or to the left.
5 Put the plug in the wall socket.
Using the blender
1 Put the ingredients in the blender jar.
C
2 Place the lid on the blender jar.
Close the lid by pushing it down firmly.
ENGLISH 9
To Next Page
Loading...
