Mounting and unmounting the motor unit and
cover
- Ensure that the control ring is set to position 1 (fig. 2).
Please note: Damage may occur if the control ring is
not in this position while opening or closing.
- Place the lid on the bowl (fig. 3).
- Place the motor unit on the cover (fig. 4).
- Turn the control ring to position 2 O/M (fig. 5).
- To release the motor unit and lid turn the control
ring to position 1 (fig. 6, 7).
Food chute and pusher
• Use the pusher to feed
ingredients through the
food chute (fig. 8).
• You can keep the pusher
in the food chute to serve
as a stopper while
operating. This will
prevent splashing and
making dust.
• During operation you
may remove the pusher from the filling opening to
add ingredients.
5
- At the bottom side of the pusher you will find an
indication where you can pierce a small opening,
using a pointed object (fig. 9). Through this opening
you can from time to time add small quantities of
liquid (e.g oil while making mayonnaise) (fig. 10).
- There are level indications (ml) on the the pushing
guide for measuring liquids.
Chopping, mixing, blending and puréeing
with the metal blade £
• Take care: the cutting edges are very sharp!
- Remove the protective cap from the metal blade
before use (fig. 11, 12).
Always hold the unprotected metal blade by
its handle.
- First position the coupler (fig. 13) and the metal
blade (fig. 14).
To Next Page
Loading...
