ENGLISH6
Parts and accessories
A Motor unit
B Speed control
P = Pulse
0 = Off
1 = Lowest speed
2 = Highest speed
C Screw cap (must be placed to use bowl
functions)
D Food processing bowl
E Tool holder
F Lid of food processing bowl
G Feed tube
H Pusher
I Kneading hook
J Metal blade + protective cover
K Slicing insert medium
L Shredding insert medium
M Insert holder
N Emulsifying disc
O Gear housing meat mincer
P Cutter housing meat mincer
Q Wormshaft
R Cutter unit
S Screw ring
T Medium grinding disc,4 mm dia.
U Coarse grinding disc,8 mm dia.
V Separator
W Sausage horn
X Tray
Y Pusher
Z Release lever
Introduction
This appliance is equipped with an automatic
thermal cut-out system.This system will
automatically cut off the power supply to the
appliance in case of overheating.
If your appliance suddenly stops
running:
1 Pull the mains plug out of the socket.
2 Turn the knob to position 0 to switch the
appliance off.
3 Let the appliance cool down for
60 minutes.
4 Put the mains plug in the socket.
5 Switch the appliance on again.
Please contact your Philips dealer or an
authorised Philips service centre if the automatic
thermal cut-out system is activated too often.
CAUTION:In order to avoid a hazardous
situation,this appliance must never be connected
to a timer switch.
To Next Page
Loading...
