EasyManua.ls Logo

Philips HTS3020/12 - Sync Audio Output with Video Play

Philips HTS3020/12
38 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18
View video play from different camera
angles
1 During play, press ANGLE repeatedly to
display the angle options.
Play changes to the selected angle. »
Note
Applicable only to discs containing multi-angle
scenes.
Quick skip play to a speci c time
1 During play, press INFO .
The disc status menu is displayed. »
2 Press to view information, then press
OK .
[TT Time] (title time)
[Ch Time] (chapter time)
[Disc Time] (disc time)
[Track Time] (track time)
3 Press the Numeric buttons to enter the
time where you want to skip to, then
press OK .
Note
The options are different depending on the disc type.
Tip
You can change the PBC setting (see ‘Adjust settings’
> ‘Preferences’ > [PBC] ).
Sync audio output with video play
If the video play is slower than the audio
output (sound does not match with the
pictures), you can delay the audio output to
match the video.
1 Press and hold AUDIO SYNC until
AUDIO SYNC XXX’ is displayed. ‘XXX
denotes the delay time.
2 Within ve seconds, press VOL +/- to set
the delay time for audio output.
Note
If the volume control is not used within 5 seconds, it
resumes normal volume control function.
Repeat play a speci c section
1 During play, press REPEAT A-B where
you want to set as the starting point.
2 Press REPEAT A-B again to set the
ending point.
Repeat play starts. »
3 To cancel repeat play, press REPEAT A-B
again.
Note
The marked section for repeat play is only possible
within a track/title.
EN
1_hts3020-12_en2.indd Sec1:181_hts3020-12_en2.indd Sec1:18 4/2/2009 10:56:32 AM4/2/2009 10:56:32 AM

Related product manuals