Note
• After you made the Wi-Fi connection, set up necessary network settings.
(For the network setting of Wi-Fi connection, refer to “Wireless” on page 40.)
• For a Wi-Fi router, use a router which supports IEEE 802.11 b/g/n.
(“n” type is recommended for stable operation of the Wi-Fi network.)
• Set the Wi-Fi router to Infrastructure mode. This unit does not support Ad-hoc mode.
• Other radio devices or obstacles may cause interference to the Wi-Fi network connection.
LAN WAN
LAN cable
(not supplied)
Internet
Networking equipment
(modem, etc.)
Wi-Fi router
To Next Page
Loading...
