17
Connect power cord
Warning
Risk of product damage! Ensure that the power •
supply voltage corresponds to the voltage printed
on the back or the underside of the Home Theater
System.
1 Connect the power cord to the power
outlet when all the required connections
are done.
The Home Theater System is ready to »
be set up for use.
Connect USB device
1 Connect the USB device to USB jack
on this Home Theater System.
Note
This Home Theater System can only play/view MP3, •
WMA, DivX (Ultra) or JPEG les that are stored on
such devices.
Press
• USB to access the content and play the les.
Connect iPod docking station
1 Connect the iPod docking station to
DOCK jack on this Home Theater
System.
Note
To listen to the audio output from this connection, •
press DOCK .
DOCK
EN
Connect
English
To Next Page
Loading...
