16
Connect power cord
Warning
Risk of product damage! Ensure that the •
power supply voltage corresponds to the
voltage printed on the back or the underside
of the product.
1 Connect the power cord to the socket
when all the required connections are
made.
This product is ready to be set up for »
use.
Mount the product
Caution
Risk of personal injury and damage to the •
product. Allow only qualifi ed persons to
mount the product.
1 Ensure all the required cables are
connected to the Home Theatre System
and close the rear cover.
2 Attach the supplied knobs to the rear of
the Home Theatre System.
Connect iPod docking station
1 Connect the iPod docking station
(optional accessory - not supplied) to
FOR iPod DOCK jack on the Home
Theatre System.
2 To view videos/photos from an iPod,
connect a composite video cable from
the docking station to the TV and switch
the TV to the correct viewing channel.
Note
To listen to the audio output from this •
connection, press iPod DOCK.
VIDEO INVIDEO IN
EN
To Next Page
Loading...
