1
Connect
A
Placement
Proper speakers system placement is important to
ensure optimum sound performance.
A Place the SonoWave speakers at the normal
listening ear level, equal distance from the TV and
face straight ahead towards the listening area.
B Place the subwoofer on the floor, at least one meter
away from the TV.
2
Set up
B
Connect the radio antennas
Keep the antennas away from the electronic devices to
prevent unwanted interference.
FM 75
MW
FM/MW ANTENNA
HDMI OUT
~
MAINS
R
L
SUB-
WOOFER
FRONT
LEFT
FRONT
RIGHT
12 mm
A
B
C
A Connect the FM antenna to the FM jack. Extend the
wire and fix its end to the wall.
B Unfold the AM/MW loop antenna and fix the claw
into the slot.
C Push the tabs and insert the wires into the AM/MW
jacks.
C
Connect the SonoWave speakers
and subwoofer
Connect the left speaker to the FRONT LEFT jack, right
speaker to the FRONT RIGHT jack and the subwoofer
to the SUBWOOFER jack at the rear of the DVD
system.
FM 75
MW
FM/MW ANTENNA
HDMI OUT
~
MAINS
R
L
SUB-
WOOFER
FRONT
LEFT
FRONT
RIGHT
SUB-
WOOFER
FRONT
LEFT
FRONT
RIGHT
DVD system (rear)
SUBWOOFER
FRONT
RIGHT
FRONT
LEFT
A
Finding the viewing channel
A Press STANDBY ON on the DVD system.
B Press SOURCE on the DVD system until “DISC”
appears on the display panel.
C Turn on the TV. Use the TV’s remote control to
select the correct viewing channel for the DVD
system.
You should see the blue DVD background on the
TV.
Note To search for the correct viewing channel,
press the Channel Down button on the TV’s remote
control repeatedly (or AV, SELECT,
°
button) until
you see the blue DVD background.
B
Setting up the SonoWave speakers
A Press and hold SOUND on the remote control to
enter the SonoWave speaker settings mode.
B Use W X keys to view the available settings (ROOM
ACOUSTICS, SPEAKER DISTANCE, LISTENING
POSITION) and press OK to select.
C Use W X keys to select a most suitable predefined
setting and press OK to confirm.
ROOM ACOUSTICS
HARD - for concrete/glass walls.
SOFT - for wooden walls.
SPEAKER DISTANCE
NEAR - ‘X’ is less than 1 meter.
DEFAULT - ‘X’ is between 1~2.5 meters.
FAR - ‘X’ is more than 2.5 meters.
LISTENING POSITION
NEAR - ‘Z’ is less than 1.5 meter.
DEFAULT - ‘Z’ is between 1.5~2.5 meters.
FAR - ‘Z’ is more than 2.5 meters.
Note The underlined options are the default setting.
D
Connect the DVD system to TV
FM 75
MW
FM/MW ANTENNA
HDMI OUT
~
MAINS
R
L
SUB-
WOOFER
FRONT
LEFT
FRONT
RIGHT
Pb
A Use the supplied composite video cable to connect
the CVBS jack on this DVD system to the VIDEO IN
jack on your TV.
B Plug in the power cables from the DVD system and
TV to the AC power outlets.
Note It is important to connect the DVD system
directly to your TV.
DVD System (rear)
Television ( rear)
E
Connect the audio from TV to DVD
system (optional)
To hear the TV audio through this home theater system,
use the red and white audio cables (not supplied) to
connect the TV IN (R/L) jacks on this DVD system to
the AUDIO output jacks on your TV.
FM 75
MW
FM/MW ANTENNA
HDMI OUT
~
MAINS
R
L
SUB-
WOOFER
FRONT
LEFT
FRONT
RIGHT
AUDIO
OUT
AUDIO IN
Note Press TV on the remote control to get the
sound output from the speakers system when watching
the TV program.
DVD System (rear)
Television ( rear)
To off-air
antenna or
set-top box
DVD System (rear)
Ensure that this portion is
fully inserted in to the jack.
To Next Page
Need help?
General
Weight and Dimensions
