18
English
Cleaning Orthodontic Brackets with the Quad Stream
Nozzle
1 To clean around orthodontic brackets, place
the nozzle tip over each bracket.
2 Gently rotate the nozzle tip around the
bracket in a small circle before moving to
the bracket on the next tooth.
After each use
1 Turn off the Cordless Power Flosser.
2 Detach and Empty the reservoir
3 Remove the nozzle from the handle by
pushing the nozzle release button on the
top of the handle
4 Rinse the nozzle under the tap
5 Dry any excess water from the nozzle, the
outside of the handle, and the reservoir
6 Insert the nozzle back into the handle or
utilize the in-reservoir nozzle storage
feature (see 'Storage').
Note: To facilitate drying, keep the reservoir
side fill port door open or leave the Cordless
Power Flosser disassembled between uses.
To Next Page
Loading...
