1. Click the Log On icon at the bottom of the imaging display.
2. In the Logon dialog box, type your user name.
3. Press the Tab key and type your password. (If you forget your system
password, contact your system administrator.)
4. Select OK to log on to the system and start the valid access period.
NOTE
Logging off of the system does not change the current patient, but it does
deny further access to protected patient data.
Logging Off of the System
If you do not log off, the system will automatically log you off when you shut
down the system or after the system has been inactive for the length of time
shown in Auto Log Off on the User Settings tab of the Data Security setups.
1. Click the Log Off icon at the bottom of the imaging display.
2. In the LogOff dialog box, click Yes.
Changing Your Password
If the data security feature is enabled on your system, you must log on to the
system to gain access to patient data and images.
Once the system administrator has given you a password for the system, you
can change it as needed. A password must be 6 to 10 characters long and can
contain only letters and numbers; punctuation marks and symbols are not allowed.
163
iE33 User Manual
4535 616 23901
5
Using the System
To Next Page
Loading...