Coverage Assessment
Troubleshooting 8-27
• Stored coverage data is deleted in Service Mode. Select Clear CAV
Data. When confirmed, the stored coverage data is erased from flash
memory.
• The total FMID is 12 bits. (The last 10 bits of the IP address and 2 bits to
define remote antennas and Core AP.)
To export Coverage Assessment data:
1. Select the appropriate device.
2. Select the Configuration/Report Tab.
3. Select Collect Device Data.
4. Deselect the Collect Full Data checkbox.
5. Save the file to the desired directory location.
Data Format – Smart-hopping Radio
Room Number Location, RSSI 1... RSSI 6, LQI 1... LQI 6, FMID 1... FMID 6,
Retry 1…Retry 6 (LQI is 0 to 4 and FMID is decimal), Room Number
Location (room#, hallway#, other#). For WLAN devices, the AP MAC
address is provided.
Example 1: 0,0,-59,-59,-58, , , ,4,4,4, , , ,3.164,3.164,3.164 RA1, , ,5,0,2, , , (‘, ,’ is
blank data)
Example 2: 0,0,-59,-59,-58,-45,-47,-50,4,4,4,4,4,4,3.164,3.140,3,142,
3.142,3,142,10,0,5,5,0,0
The graphics below are examples of an Excel spreadsheet and summary for
coverage assessment data with a 1.4GHz Smart-hopping radio.
To Next Page
Loading...
