MX40 2.4 GHz WLAN Radio
Safety Standards & Specifications 10-23
MX40 2.4 GHz WLAN Radio
The MX40 2.4GHz/5.6GHz WLAN Radio conforms to the 802.11 a/b/g/n
standard operating in the 2.4GHz and 5.6GHz ISM bands.
Note — For the MX40 WLAN device, Part Number 865352, use of the MX40's
short-range Radio is only supported when operating with 802.11a (5.6GHz
band).
The Radio characteristics are defined below.
WLAN Radio RF Specs Specification
802.11b
Technology IEEE 802.11 b
Frequency Range 2.4 to 2.4835GHz
Transmitter Power 10 to 15 dBm into antenna load (RMS power)
Modulation CCK (Complementary Code Keying)
Occupied Bandwidth, 99% <-22 MHz
802.11g, 802.11ng
Technology IEEE 802.11 g, 802.11 ng
Frequency Range 2.4 to 2.4835GHz
Transmitter Power 9.5 to 15 dBm into antenna load (RMS power)
Occupied Bandwidth, 99% <-22 MHz
Modulation Type OFDM (Orthogonal Frequency Division Multiplex)
Frequency Bands (802.11 b/g) FCC, RSS-210, ETSI
Japan{ARIB},China, AS/NZS: 2.400 – 2.4835GHz
Out of Band Emissions (802.11
b/g)
Meets ETSI, RSS-210, FCC, ARIB, AS/NZS standards
802.11a, 802.11na
Technology IEEE 802.11a, 802.11na
Frequency Power 5.15 to 5.825GHz
Transmitter Power 7 to 15 dBm into Antenna load (RMS power)
Occupied Bandwidth ≤ 19 MHz (802.11a, 802.11na)
≤ 37 MHz (802.11na bonded channel)
Modulation DSSS : OFDM (Orthogonal Frequency Division Multiplex)
Frequency Bands (802.11a,
802.11na)
FCC, RSS-210: 5.15 ~ 5.25Ghz, 5.25 ~ 5.35Ghz, 5.42 ~
5.725Ghz, 5.725 ~ 5.825Ghz (excluding 5.6 ~5.65GH
ETSI, AS/NZS: 5.15~ 5.35Ghz, 5.47 ~ 5.725Ghz Japan,
ARIB: 5.150 – 5.250GHz, 5.25 – 5.35GHz, 5.470 –
5.725GHz, China: 5.725 ~5.825Ghz
To Next Page
Loading...
