Monitoring Mode
Operating Modes 4-7
SmartKey Function
Setup Screen Determines time period that the display
remains active after user interaction or
whether the display is always On or
always Off.
Lock/Unlock Locks/Unlocks the display.
Op Modes Selects either Monitoring, Demo, Config
or Service modes.
Alarms Area
• The Alarm Area of the MX40 displays
physiological alarms and technical alarms.
• A multiple alarm indicator (down arrow) is
displayed when multiple alarm conditions are
present and the alarm message rotates every 3
seconds.
• A check mark in front of the alarm text signifies
that the alarm has been acknowledged by
touching the Silence Alarms button at the MX40
or IIC iX.
• Alarm Indicators display in the Patient Information
Area in place of the time clock when alarm/INOP
conditions are present but have not been
acknowledged.
• Touching the Alarms Area displays a list of all
active alarms.
• The alarms paused icon communicates whether
the alarm system is on/off. When alarms are
paused from the IIC, the display wakes at half
brightness to indicate the alarm pause state.
• Local Alarm Audio is off when the alarm volume
symbol is present next to the time. The Local
Audio Off message is displayed as a reminder
that alarms are never annunciated in Telemetry
Mode.
To Next Page
Loading...
