Monitoring Mode
4-8 Operating Modes
Patient Information Area
The Patient Information Area displays the following information:
• Bed Label
• Patient Name (up to 18 characters will display)
• Time
Touching the Patient Information Area displays the Patient Demogr. menu which lists the
following:
• Patient Name (Last, First, Middle)
• Lifetime ID
• Encounter ID
• Patient Category
• Paced Mode
• Height
• Weight
• Date of Birth
• Gender
Note — If you use an alternative ID, it will display at the Information Center and on printed
reports. It will not display at the MX40.
Paced Status
1. Pacing algorithm is on.
2. Pacing algorithm is off.
3. Pacing algorithm is on.
Patient's paced status
is unknown.
Display Lock
The Lock symbol appears in the lower left of the display when the MX40
is in a locked state after a configured time of non-use (1-30 minutes,
default of 1 minute), or if configured to do so during the start-up process.
Locking the display provides additional protection against accidental
patient access. The display is unlocked using the SmartKeys menu.
Additionally, the MX40 can be configured to require a 3-5 digit numeric
only password to unlock the device.
Status Area
The status area of the MX40 displays short-range radio
connection (optional) and system wireless connection status.
You can also view battery strength for the type of battery
used in the device, AA or rechargeable Li-on.
To Next Page
Loading...
