Monitoring Mode
4-12 Operating Modes
Identifying the SpO
2
Patient Cable Type
The patient cable with SpO2 is available in two versions, Philips FAST and
Masimo SET. Each cable contains the markings as shown in the diagram
below.
Note — For more information on cable/device identification, see the MX40
SpO
2 Option Quick Card, p/n 4535 648 13471.
Note — The Philips FAST patient cable is not compatible with Masimo SET
devices. The Philips Masimo SET patient cable is not compatible with
Philips FAST devices. An Invalid Leadset INOP will display, along with
instruction to connect the proper patient cable.
To Next Page
Loading...
