Philips IntelliVue MX40 User Manual

Contents 5
Understanding SpO
2
Alarms --------------------------------------------------- 9-10
10. Monitoring with other Assigned Devices 10-1
Assigning Devices --------------------------------------------------------------------- 10-3
Device Assignment at the Information Center ---------------------------- 10-3
Device Assignment at the MX40 ---------------------------------------------- 10-3
Device Assignment at the Patient Monitor --------------------------------- 10-4
Controls Available when Assigned to IntelliVue Cableless Measurements10-6
Controls Available when Assigned to IntelliVue Patient Monitors -------- 10-7
Networked Device Synchronized Settings -------------------------------------- 10-8
MX40 Display when Wirelessly Connected to a Patient Monitor --------- 10-9
11. Monitoring with the MX40 at the Information Center 11-1
MX40 Connection to the Information Center ----------------------------------- 11-2
MX40 Controls in the Patient Window (IIC) ------------------------------------ 11-3
MX40 Controls in the Patient Window (IIC iX) --------------------------------- 11-5
Locating the MX40 (Find Device) ------------------------------------------------- 11-7
Viewing Device Location and Location History (optional) ------------------ 11-8
Using the Device Location Client (optional - IIC only) ----------------------- 11-9
Patient Configurable Settings in Telemetry Setup -------------------------- 11-10
Unit Configurable Settings -------------------------------------------------------- 11-13
12. Operating with Information Center Release L or M 12-1
Display ----------------------------------------------------------------------------------- 12-2
Alarms ------------------------------------------------------------------------------------ 12-3
13. Trends 13-1
Viewing Vital Trend Information --------------------------------------------------- 13-2
14. Maintenance 14-1
Cleaning --------------------------------------------------------------------------------- 14-2
Cleaning Materials for the MX40 --------------------------------------------- 14-3
Disposing of the MX40 --------------------------------------------------------------- 14-5
Label Assignment for Replacement MX40 ------------------------------------- 14-6
Re-assigning an Equipment Label at the IntelliVue Information Center14-6
Re-assigning an Equipment Label at the IntelliVue Information Center
iX -------------------------------------------------------------------------------------- 14-7
Charging Lithium-ion Rechargeable Batteries --------------------------------- 14-8
Battery Power Indicators -------------------------------------------------------- 14-8
Charging Station LEDs -------------------------------------------------------- 14-8
Battery Status on the Charging Station Display ------------------------ 14-9
Battery Lifetime Management ------------------------------------------------- 14-9
Battery Disposal ----------------------------------------------------------------- 14-10
15. Safety Standards & Specifications 15-1
Regulatory Information --------------------------------------------------------------- 15-2
Software Hazard Prevention --------------------------------------------------- 15-2
Draft Copy

Philips IntelliVue MX40 Specifications

General

Brand	Philips
Model	IntelliVue MX40
Category	Cables and connectors
Language	English