Philips IntelliVue Telemetry System Infrastructure - Radio Compliance Specifications; Safety Regulatory Compliance

1-26
Chapter 1: Overview
Radio Compliance Specifications
Safety Regulatory Compliance
Table 1-14: 1.4 GHz ITS FCC Compliance Specifications
FCC Specification
Relevant
Paragraphs
Content Device
47CFR 95, sub-part H,
WMTS Services
95.1115,
95.1125,
95.1109
Field strength limits,
Undesired emissions
Emission types, Channel use,
Frequency stability, Labeling
Patient-worn
Transceiver,
Standard and Core
Access Point
powered by POE
Unit.
47CFR 15, sub-part C 15.203 Antenna requirement Standard and Core
Access Point
47CFR 15, sub-part B,
Unintentional
Radiators
15.101,
15.105,
15.107, 15.109
General labeling & user
information Conducted &
Radiated limits
Sync Unit, PoE Unit,
and APC
47CFR 15, sub-part A,
General
15.19
15.31, e)
15.33, 1)
15.35, c)
Required labeling,
Allowed RF power variation,
Allowed RF harmonic
radiation, RF power
measurement is averaged
over one complete pulse
train for pulsed operation
Sync Unit, PoE Unit,
and APC
Table 1-15: ITS Infrastructure Safety Standard Compliance
Safety Specification Compliant ITS Device/Component
Information Technology Equipment - Safety
IEC 60950-1:2001
(1st Edition)
Standard and Core Access Points, APC, and
Sync Unit, PoE Unit, Switches, Routers, UPS.
UL 2043: 2003
U.S. National Electrical Code
NFPA 70:2002,
Paragraph 300.22, Subpart C
1.4 GHz Core APs and Remote Antennas
installed in air-handling spaces.
Standard 1.4 GHz and 2.4 GHz Access
Points installed in air-handling spaces
comply when installed within a compliant
enclosure available from Philips.
“Air-handling spaces” include the areas
above dropped ceilings. These spaces are
not to be confused with “plenum,” which
refers to air ducts. ITS APs are not mounted
in plenum space.
Standard for Uninterruptible Power Supply
Equipment
UL 1778:First Edition, 23-Nov-92 with revisions
dated 6-Dec-93, 4-Feb-94, 19-Jul-94
UPS.